Audioengine W3 - Premium Wireless Audio Adapter (Sender + Receiver)

  • Sale
  • $149.00
  • Regular price
Shipping calculated at checkout.

Payment methods
  • American Express
  • Apple Pay
  • Diners Club
  • Discover
  • Elo
  • Google Pay
  • JCB
  • Mastercard
  • PayPal
  • Shop Pay
  • Venmo
  • Visa

W3 WIRELESS AUDIO ADAPTER

Tech_Specs
  • GENERAL SPECIFICATIONS
     

    DAC type
    Dual mode USB and analog (via CS5343 ADC) wireless DAC

    Inputs
    USB audio, mini-jack analog

    Outputs
    analog mini-jack

    DAC
    CS4344

    ADC
    CS5343

    Full scale output
    1.0Vrms

    Output impedance
    470 ohms

    Power source
    Sender: USB from computer or adapter
    Receiver: USB power adapter

    Power requirements
    Sender: 180mA, 5V
    Receiver: 150mA, 5V

    SNR
    95dB

    THD+N
    0.01%

    Crosstalk
    -65dB

    Frequency response
    20Hz to 20KHz, +/- .2dB

    Input bit depth
    up to 16 bits native

    Input sample rate
    up to 48KHz native

    USB device class
    type 1.1 or above

    Wireless operation range
    Up to 100ft (30m) typical

    Latency
    <20ms

    Receivers supported
    up to 3

    Product dimensions
    100x30x10mm (LxWxH)

    Shipping weight
    1 lb

    Included accessories
    minijack cable (20″), minijack to RCA adapter (12″), USB power adapter

    Environmental
    Operating Temperature: 32 to 95 degrees F
    Non-operating Temp: -4 to 113 degrees F
    Relative Humidity: 5% to 95% non-condensing

    Advantages of wireless
    The W3 wireless system transmits bit-perfect PCM-stereo simultaneously to up to 3 receivers. Because the USB controller in the Sender and the DAC in the Receiver are segregated by the wireless subsystem, various anomalies which plague many wired DACs such as jitter, grounding, and induced cable noise are greatly reduced. In addition, the W3 allows the user to physically isolate a potentially noisy computer from the sensitive audio components in your system.

    W3 USB
    The W3 utilizes the TI CC8520 PurePath™ USB wireless system-on-a-chip solutions, TI’s newest offering to the wireless audio arena. The Sender can be powered directly from the USB bus or from the included external power adapter.

    W3 DAC
    The W3 Receiver utilizes the CS4344 DAC, a solid, well regarded industry mainstay. Due to the CS4344’s’s high signal-to-noise specs, the W3 presents impressive low noise and low distortion characteristics.